Network Working Group P. Hoffman
Internet-Draft VPN Consortium
Intended status: Standards Track J. Schlyter
Expires: February 25, 2011 Kirei AB
W. Kumari
A. Langley
Google
August 24, 2010
Using Secure DNS to Associate Certificates with Domain Names For TLS
draft-hoffman-keys-linkage-from-dns-01
Abstract
TLS and DTLS uses certificates for authenticating the server. Users
want their applications to verify that the certificate provided by
the TLS server is in fact associated with the domain name they
expect. Instead of trusting a certificate authority to have made
this association correctly, the user might instead trust the
authoritative DNS server for the domain name to make that
association. This document describes how to use secure DNS to
associate the TLS server's certificate with the the intended domain
name.
Status of this Memo
This Internet-Draft is submitted in full conformance with the
provisions of BCP 78 and BCP 79.
Internet-Drafts are working documents of the Internet Engineering
Task Force (IETF). Note that other groups may also distribute
working documents as Internet-Drafts. The list of current Internet-
Drafts is at http://datatracker.ietf.org/drafts/current/.
Internet-Drafts are draft documents valid for a maximum of six months
and may be updated, replaced, or obsoleted by other documents at any
time. It is inappropriate to use Internet-Drafts as reference
material or to cite them other than as "work in progress."
This Internet-Draft will expire on February 25, 2011.
Copyright Notice
Copyright (c) 2010 IETF Trust and the persons identified as the
document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal
Hoffman, et al. Expires February 25, 2011 [Page 1]
Internet-Draft DNS Cert Linkage for TLS August 2010
Provisions Relating to IETF Documents
(http://trustee.ietf.org/license-info) in effect on the date of
publication of this document. Please review these documents
carefully, as they describe your rights and restrictions with respect
to this document. Code Components extracted from this document must
include Simplified BSD License text as described in Section 4.e of
the Trust Legal Provisions and are provided without warranty as
described in the Simplified BSD License.
1. Introduction
The first response from the server in TLS may contain a certificate.
In order for the TLS client to authenticate that it is talking to the
expected TLS server, the client must validate that this certificate
is associated with the domain name used by the client to get to the
server. Currently, the client must extract the domain name from one
of many places in the certificate, must trust the trust anchor upon
which the server's certificate is rooted, and must perform correct
validation on the certificate.
This document applies to both TLS [RFC5246] and DTLS [4347bis]. In
order to make the document more readable, it mostly only talks about
"TLS", but in all cases, it means "TLS or DTLS".
Some people want a different way to authenticate the association of
the server's certificate with the intended domain name without
trusting the CA. Given that the DNS administrator for a domain name
is authorized to give identifying information about the zone, it
makes sense to allow that administrator to also make an authoritative
binding between the domain name and a certificate that might be used
by a host at that domain name. The easiest way to do this is to use
the DNS.
A certificate association is a cryptographic hash of a certificate
(sometimes called a "fingerprint"). That is, a hash is taken of the
certificate, and that hash is the certificate association. The type
of hash function used can be chosen by the DNS administrator.
DNSSEC, which is defined in RFCs 4033, 4034, and 4035 ([RFC4033],
[RFC4034], and [RFC4035]), uses cryptographic keys and digital
signatures to provide authentication of DNS data. Information
retrieved from the DNS and that is validated using DNSSEC is thereby
proved to be the authoritative data.
This document defines a secure method to associate the certificate
that is obtained from the TLS server with a domain name using DNS
protected by DNSSEC. Because the certificate association was
Hoffman, et al. Expires February 25, 2011 [Page 2]
Internet-Draft DNS Cert Linkage for TLS August 2010
retrieved based on a DNS query, the domain name in the query is by
definition associated with the certificate.
This document only relates to securely getting the DNS information
for the certificate association using DNSSEC; other secure DNS
mechanisms are out of scope. The DNSSEC signature MUST be validated
on all responses in order to assure the proof of origin of the data.
This document only relates to securely associating certificates for
TLS and DTLS; other security protocols are handled in other
documents. For example, keys for IPsec are covered in [RFC4025] and
keys for SSH are covered in [RFC4255].
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
"SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
document are to be interpreted as described in RFC 2119 [RFC2119].
This document is being discussed on the "keyassure" mailing list; see
<https://www.ietf.org/mailman/listinfo/keyassure>.
2. Getting TLS Certificate Associations from the DNS with the CERT RR
This section describes the TLSFP Certificate Type of the CERT RR.
The CERT RR [RFC4398] allows expansion by defining new certificate
types. The new TLSFP certificate type is defined here. A query on a
domain name for the CERT RR can return one or more records of the
type CERT, and zero or more of those CERT responses can be of type
TLSFP.
o The TLSFP certificate type is TBD.
o The key tag and algorithm fields are both set to zero.
The format of the TLSFP certificate is a binary record, which MUST be
in the order defined here, is:
o A one-octet value, called "hash type", specifying the type of hash
algorithm used for the certificate association. This value has
the same values as those of the DS RR, as defined in [RFC4034] and
its successors.
o A one-octet value, called "validation preference", specifying the
preferences for further validation of the certificate in TLS. A
certificate association that contains a validation preference
whose value is 1 indicates that the TLS administrator believes
that it is sufficient to match the certificate association with
the hash of certificate received in the TLS negotiation, and that
Hoffman, et al. Expires February 25, 2011 [Page 3]
Internet-Draft DNS Cert Linkage for TLS August 2010
no further certificate validation is necessary. A certificate
association that contains a validation preference whose value is 0
indicates that the TLS administrator believes that it is not
sufficient to match the certificate association with the hash of
certificate received in the TLS negotiation, and that normal
certificate validation is necessary. Note that the validation
preference is an advisory, and it is not mandatory for a TLS
client to follow the advice.
o A variable-length set of bytes containing the hash of the
associated certificate.
For example:
www.example.com. IN CERT TLSFP 0 0 ( AQGa+FZd8sAeS03ca8xDigDQ
ePgJnQvgMe/kKyf8rzluiQ== )
3. Use of TLS Certificate Associations from the DNS in TLS
In order to use one or more TLS certificate associations obtained
from the DNS, an application MUST assure that the certificates were
obtained using DNS protected by DNSSEC. There may be other methods
to securely obtain certificates in DNS, but those methods are not
covered by this document.
An application that requests TLS certificate associations using the
method described in the previous section obtains zero or more
certificate associations. If the application receives zero
certificate associations, it process TLS in the normal fashion.
If a certificate association contains a hash type that is not
understood by the TLS client, that certificate association MUST be
completely ignored.
If a match between the certificate association(s) and the server's
end entity certificate in TLS is not found, the TLS client MUST abort
the handshake with an "access_denied" error.
If the TLS server authenticates itself with a self-signed
certificate, it SHOULD be sure that the validation preference in the
CERT RR is set to 1. If the TLS server administrator believes that
there is information in its certificate that is relevant to the TLS
client other than the public key (such as a extended value (EV)
name), it SHOULD be sure that the validation preference in the CERT
RR is set to 0.
Hoffman, et al. Expires February 25, 2011 [Page 4]
Internet-Draft DNS Cert Linkage for TLS August 2010
4. IANA Considerations
This document requests that IANA allocates one certificate type from
the CERT RR certificate type registry. The type is to be allocated
from the 'IETF Consensus' range.
Decimal type: TBD
Type: TLSFP
Meaning: TLS Certificate Associations
5. Security Considerations
[[ TBD. This section will need to describe, at least, the "attack"
where a DNS administrator goes rogue and changes both the A and CERT
records for a domain name. Also will discuss the need for secure
DNS. ]]
6. Acknowledgements
Many of the ideas in this document have been discussed over many
years. More recently, the ideas have been discussed by the authors
and others in a more focused fashion. In particular, some of the
ideas here originated with Paul Vixie, Dan Kaminsky, Jeff Hodges,
Simon Josefsson, among others.
7. References
7.1. Normative References
[4347bis] Rescorla, E. and N. Modadugu, "Datagram Transport Layer
Security version 1.2", draft-ietf-tls-rfc4347-bis (work in
progress), July 2010.
[RFC2119] Bradner, S., "Key words for use in RFCs to Indicate
Requirement Levels", BCP 14, RFC 2119, March 1997.
[RFC4033] Arends, R., Austein, R., Larson, M., Massey, D., and S.
Rose, "DNS Security Introduction and Requirements",
RFC 4033, March 2005.
[RFC4034] Arends, R., Austein, R., Larson, M., Massey, D., and S.
Rose, "Resource Records for the DNS Security Extensions",
RFC 4034, March 2005.
Hoffman, et al. Expires February 25, 2011 [Page 5]
Internet-Draft DNS Cert Linkage for TLS August 2010
[RFC4035] Arends, R., Austein, R., Larson, M., Massey, D., and S.
Rose, "Protocol Modifications for the DNS Security
Extensions", RFC 4035, March 2005.
[RFC4398] Josefsson, S., "Storing Certificates in the Domain Name
System (DNS)", RFC 4398, March 2006.
[RFC5246] Dierks, T. and E. Rescorla, "The Transport Layer Security
(TLS) Protocol Version 1.2", RFC 5246, August 2008.
7.2. Informative References
[RFC4025] Richardson, M., "A Method for Storing IPsec Keying
Material in DNS", RFC 4025, March 2005.
[RFC4255] Schlyter, J. and W. Griffin, "Using DNS to Securely
Publish Secure Shell (SSH) Key Fingerprints", RFC 4255,
January 2006.
Appendix A. Ideas Considered But Not Necessarily Chosen
This appendix will list some of the ideas that have been kicked
around in this space and give a few paragraphs why they weren't
chosen for the current version this proposal. The following is a
placeholder for the list that will be filled out more in future
versions of this document:
o A flag that indicates that the certificate with the associated key
must be signed by a trusted CA. Briefly: this was not added
because it is up to the TLS server to decide which type of
certificate it wants to serve up. Serving a self-signed
certificate would effectively disable traditional PKIX validation,
whereas serving a certificate signed by a trusted CA would require
both validation by DNSSEC and the trusted CA.
o A flag that indicates that all connections to this server need to
be TLS secured. Briefly: this is a good idea but it is not
related to the key of the certificate given in TLS, and thus
should be indicated in a different method.
o Giving keys instead of hashes of keys. Briefly: TLS requires that
the server gives a certificate, and some systems use the metadata
from a CA-signed certificate for display, so there is value to
always looking in the certificate.
o Hashes of keys vs. hashes of certificates. Briefly: we have
changed our minds (at least once) on this. Our original thinking
Hoffman, et al. Expires February 25, 2011 [Page 6]
Internet-Draft DNS Cert Linkage for TLS August 2010
was that there are many reasons why someone might change their
certificate while leaving the public key alone, and those changes
should not have to force them to change the DNS record because
they do not actually change what the TLS client cares about; thus,
use hashes of keys. Our new thinking is that there are
certificate semantics that we want to pass (namely, should the
client actually do the certificate validation), and attaching
those semantics to keys is confusing; thus, use hashes of
certificates.
o List TLS/DTLS ports or services for which the certificate is
associated. Briefly: we had this in an earlier version of this
document but got rid of it when it was pointed out that this is an
edge case, and most servers differentiate these services by domain
names such as "mail.example.com" and "www.example.com".
o Different ways of encoding this information in the DNS. Briefly:
we considered a new RR type and coming up with an encoding of the
TXT RR type, but didn't see any significant advantage of them over
using the CERT RR, and there were disadvantages. A disadvantage
of a new RR type is getting DNS servers and clients to recognize
it; a disadvantage of coming up with a new TXT format is that
doing so prevents wildcards. There is a lot more to discuss here,
but the authors are now happy with a new sub-type for the CERT RR.
o Having the hash be over the TLS certificate structure instead of
just the end-entity certificate. Briefly: the TLS certificate
structure currently allows a chain of PKIX certificates, and the
semantics of what is being associated in a chain is not clear.
Further, the structure might be changed in the future (such as to
allow a group of web-of-trust OpenPGP certificates), and the
semantics of what is being associated would become even less
clear.
Appendix B. Changes between -00 and -01
Change the association from being a hash of the key of a PKIX
certificate to being a hash of a certificate (PKIX or other). This,
of course, makes large changes throughout the document.
Expanded the document to cover DTLS as well.
Added a pointer to the keyassure mailing list.
Removed the proposals for two alternate formats (the TLSFP Resource
Record and the TXT record encoding). Added a bit to Appendix A about
this.
Hoffman, et al. Expires February 25, 2011 [Page 7]
Internet-Draft DNS Cert Linkage for TLS August 2010
Got rid of the specification for ports within a single domain name.
Made the hash type one octet and used the DS registry instead of
defining our own.
Added "Necessarily" chosen in the title of Appendix A to show that we
might (continue to) change our minds after discussion.
Added Simon Josefsson to the acknowledgements.
Authors' Addresses
Paul Hoffman
VPN Consortium
Email: paul.hoffman@vpnc.org
Jakob Schlyter
Kirei AB
Email: jakob@kirei.se
Warren Kumari
Google
Email: warren@kumari.net
Adam Langley
Google
Email: agl@google.com
Hoffman, et al. Expires February 25, 2011 [Page 8]