diff options
| author | Jordan K. Hubbard <jkh@FreeBSD.org> | 1996-07-12 16:33:27 +0000 |
|---|---|---|
| committer | Jordan K. Hubbard <jkh@FreeBSD.org> | 1996-07-12 16:33:27 +0000 |
| commit | 79a6413feb69efce127cc8dc70a0f19937caa6db (patch) | |
| tree | 3e218c1c2b09c6062bf70fcd37928cc4518bdbd7 | |
| parent | 7a1ca4e0ffd9c688d498f42f55916d100d5e90ec (diff) | |
Mergify
Notes
svn path=/branches/RELENG_2_1_0/; revision=423
| -rw-r--r-- | handbook/contrib.sgml | 6 | ||||
| -rw-r--r-- | handbook/current.sgml | 6 | ||||
| -rw-r--r-- | handbook/eresources.sgml | 11 | ||||
| -rw-r--r-- | handbook/hw.sgml | 14 | ||||
| -rw-r--r-- | handbook/stable.sgml | 6 | ||||
| -rw-r--r-- | handbook/submitters.sgml | 24 |
6 files changed, 32 insertions, 35 deletions
diff --git a/handbook/contrib.sgml b/handbook/contrib.sgml index 85a28af23e..811e21f87f 100644 --- a/handbook/contrib.sgml +++ b/handbook/contrib.sgml @@ -1,4 +1,4 @@ -<!-- $Id: contrib.sgml,v 1.15.2.10 1996-07-03 01:39:23 jkh Exp $ --> +<!-- $Id: contrib.sgml,v 1.15.2.11 1996-07-12 16:33:20 jkh Exp $ --> <!-- The FreeBSD Documentation Project --> <chapt><heading>FreeBSD contributor list<label id="contrib"></heading> @@ -167,6 +167,7 @@ <item>Andrew McRae <amcrae@cisco.com> <item>Andrew Moore <alm@FreeBSD.org> <item>Andrew V. Stesin <stesin@elvisti.kiev.ua> + <item>Andrey Zakhvatov <andy@cgu.chel.su> <item>Anthony Yee-Hang Chan <yeehang@netcom.com> <item>Bernd Rosauer <br@netland.inka.de> <item>Bob Wilcox <bob@obiwan.uucp> @@ -190,8 +191,10 @@ <item>Daniel Baker <dbaker@crash.ops.neosoft.com> <item>Daniel M. Eischen <deischen@iworks.InterWorks.org> <item>Danny J. Zerkel <dzerkel@feephi.phofarm.com> + <item>Dave Bodenstab <imdave@synet.net> <item>Dave Burgess <burgess@hrd769.brooks.af.mil> <item>Dave Chapeskie <dchapes@zeus.leitch.com> + <item>Dave Edmondson <davided@sco.com> <item>Dave Rivers <rivers@ponds.uucp> <item>David Dawes <dawes@physics.su.OZ.AU> <item>David O'Brien <obrien@cs.ucdavis.edu> @@ -222,6 +225,7 @@ <item>Jian-Da Li <jdli@FreeBSD.csie.NCTU.edu.tw> <item>Jim Lowe <james@miller.cs.uwm.edu> <item>Jim Wilson <wilson@moria.cygnus.com> + <item>Johann Tonsing <jtonsing@mikom.csir.co.za> <item>John Capo <jc@irbs.com> <item>John Perry <perry@vishnu.alias.net> <item>Juergen Lock <nox@jelal.hb.north.de> diff --git a/handbook/current.sgml b/handbook/current.sgml index 73f8085542..e4ba2d7a53 100644 --- a/handbook/current.sgml +++ b/handbook/current.sgml @@ -1,4 +1,4 @@ -<!-- $Id: current.sgml,v 1.2.4.5 1996-07-05 11:30:15 jkh Exp $ --> +<!-- $Id: current.sgml,v 1.2.4.6 1996-07-12 16:33:21 jkh Exp $ --> <!-- The FreeBSD Documentation Project --> @@ -10,7 +10,7 @@ THE FREEBSD CURRENT POLICY -Last updated: $Date: 1996-07-05 11:30:15 $ +Last updated: $Date: 1996-07-12 16:33:21 $ This document attempts to explain the rationale behind FreeBSD-current, what you should expect should you decide to run it, @@ -115,7 +115,7 @@ ask! It takes far too much time to do this as a general task. have a good TCP/IP connection at a flat rate, this is the way to do it. - <item> Use the CMU <ref id="sup"> program (Software Update + <item> Use the CMU <ref id="sup" name="sup"> program (Software Update Protocol). This is the second most recommended method, since it allows you to grab the entire collection once and then only what has diff --git a/handbook/eresources.sgml b/handbook/eresources.sgml index 52a213e55a..20f3a5ec1f 100644 --- a/handbook/eresources.sgml +++ b/handbook/eresources.sgml @@ -1,4 +1,4 @@ -<!-- $Id: eresources.sgml,v 1.2.4.5 1996-06-19 20:27:40 jkh Exp $ --> +<!-- $Id: eresources.sgml,v 1.2.4.6 1996-07-12 16:33:22 jkh Exp $ --> <!-- The FreeBSD Documentation Project --> <chapt> @@ -53,7 +53,6 @@ freebsd-chat Non-technical items related to the FreeBSD community freebsd-current Discussion concerning the use of FreeBSD-current freebsd-stable Discussion concerning the use of FreeBSD-stable freebsd-isp Issues for Internet Service Providers using FreeBSD -freebsd-policy General policy issues and suggestions freebsd-questions User questions </verb> @@ -252,14 +251,6 @@ development and their support within FreeBSD platforms</em><newline> Cross-platform freebsd issues, general discussion and proposals for non-Intel FreeBSD ports. -<tag/FREEBSD-POLICY/ <em>Policy issues and -suggestions</em><newline> This is a forum for policy discussions -related to FreeBSD. This includes where FreeBSD is going, how to -set up a consortium, whether or not and how to make FreeBSD pay -for itself, how to attract more users, and so on. When a topic -relates directly to FreeBSD but has little or no technical -content then it should be sent to this list. - <tag/FREEBSD-PORTS/ <em>Discussion of "ports"</em><newline> Discussions concerning FreeBSD's "ports collection" (/usr/ports), proposed ports, modifications to ports collection infrastructure and general diff --git a/handbook/hw.sgml b/handbook/hw.sgml index 003ec420b1..d992a8a4b9 100644 --- a/handbook/hw.sgml +++ b/handbook/hw.sgml @@ -1,4 +1,4 @@ -<!-- $Id: hw.sgml,v 1.6.2.4 1996-07-05 11:30:17 jkh Exp $ --> +<!-- $Id: hw.sgml,v 1.6.2.5 1996-07-12 16:33:23 jkh Exp $ --> <!-- The FreeBSD Documentation Project --> <!-- @@ -840,7 +840,7 @@ an exabyte 2 GB 8mm tape drive. 8mm drives are reliable, convienent and quiet. Cartidges are inexpensive and small (4.8 x 3.3 x 0.6 inches; 122 x 84 x 15 mm). One downside of 8mm tape is relatively short head and tape life due to the high rate of -relative motion of the tape accross the heads. +relative motion of the tape across the heads. <!--spec--> <p>Data thruput ranges from ~250kB/s to ~500kB/s. Data @@ -857,7 +857,7 @@ heads are positioned at an angle to the media (approximately 6 degrees). The tape wraps around 270 degrees of the spool that holds the heads. The spool spins while the tape slides over the spool. The result is a high density of data and closely packed -tracks that angle accross the tape from one edge to the other. +tracks that angle across the tape from one edge to the other. <sect3><heading><label id="hw:storage:tapebackups:qic"> @@ -975,7 +975,7 @@ overridden on the command line to utilize the capacity of current tape drives. <p><tt>rdump(8)</tt> and <tt>rrestore(8)</tt> backup data -accross the network to a tape drive attached to another computer. +aross the network to a tape drive attached to another computer. Both programs rely upon <tt>rcmd(3)</tt> and <tt>ruserok(3)</tt> to access the remote tape drive. Therefore, the user performing the backup must have <tt>rhosts</tt> access to the remote @@ -983,7 +983,7 @@ computer. The arguments to <tt>rdump(8)</tt> and <tt>rrestore(8)</tt> must suitable to use on the remote computer. (e.g. When <tt>rdump</tt>'ing from a FreeBSD computer to an Exabyte tape drive connected to a Sun called komodo, use: <tt>/sbin/rdump -0dsbfu 54000 13000 126 komodo:/dev/nrst8 /dev/rsd0a 2>&1</tt>) +0dsbfu 54000 13000 126 komodo:/dev/nrst8 /dev/rsd0a 2>&1</tt>) Beware: there are security implications to allowing <tt>rhosts</tt> commands. Evaluate your situation carefully. @@ -999,7 +999,7 @@ that are available from <tt>cpio(1)</tt>, but <tt>tar(1)</tt> does not require the unusual command pipeline that <tt>cpio(1)</tt> uses. - <p><tt>tar(1)</tt> does not support backups accross the + <p><tt>tar(1)</tt> does not support backups across the network. You can use a pipeline and <tt>rsh(1)</tt> to send the data to a remote tape drive. (XXX add an example command) @@ -1013,7 +1013,7 @@ This last feature makes <tt>cpio(1)</tt> and excellent choice for installation media. <tt>cpio(1)</tt> does not know how to walk the directory tree and a list of files must be provided thru <tt>STDIN</tt>. - <p><tt>cpio(1)</tt> does not support backups accross the + <p><tt>cpio(1)</tt> does not support backups across the network. You can use a pipeline and <tt>rsh(1)</tt> to send the data to a remote tape drive. (XXX add an example command) diff --git a/handbook/stable.sgml b/handbook/stable.sgml index 784f61b8a7..768df7242a 100644 --- a/handbook/stable.sgml +++ b/handbook/stable.sgml @@ -1,4 +1,4 @@ -<!-- $Id: stable.sgml,v 1.2.2.1 1996-07-05 11:30:22 jkh Exp $ --> +<!-- $Id: stable.sgml,v 1.2.2.2 1996-07-12 16:33:24 jkh Exp $ --> <!-- The FreeBSD Documentation Project --> @@ -10,7 +10,7 @@ THE FREEBSD STABLE POLICY -Last updated: $Date: 1996-07-05 11:30:22 $ +Last updated: $Date: 1996-07-12 16:33:24 $ This document attempts to explain the rationale behind FreeBSD-stable, what you should expect should you decide to run it, @@ -69,7 +69,7 @@ next section). have a good TCP/IP connection at a flat rate, this is the way to do it. - <item> Use the CMU <ref id="sup"> program (Software Update + <item> Use the CMU <ref id="sup" name="sup"> program (Software Update Protocol). This is the second most recommended method, since it allows you to grab the entire collection once and then only what has diff --git a/handbook/submitters.sgml b/handbook/submitters.sgml index 5b2bb8b425..9a89b30455 100644 --- a/handbook/submitters.sgml +++ b/handbook/submitters.sgml @@ -1,4 +1,4 @@ -<!-- $Id: submitters.sgml,v 1.2.4.3 1996-06-19 20:28:25 jkh Exp $ --> +<!-- $Id: submitters.sgml,v 1.2.4.4 1996-07-12 16:33:27 jkh Exp $ --> <!-- The FreeBSD Documentation Project --> <chapt><heading>Contributing to FreeBSD<label id="submitters"></heading> @@ -115,19 +115,21 @@ some kind of symbol table in the kernel. your hardware in a sane manner, keeps only the LKMs required for your hardware, etc. </itemize> -<item>PCMCIA/PCCARD. Coordinator: &a.phk +<item>PCMCIA/PCCARD. Coordinators: &a.nate and &a.phk <itemize> -<item>Reliable operation of the pcic driver. -<item>Recognizer and handler for sio.c -<item>Recognizer and handler for ed.c -<item>Recognizer and handler for ep.c -<item>User-mode recognizer and handler. +<item>Documentation! +<item>Reliable operation of the pcic driver (needs testing). +<item>Recognizer and handler for sio.c (mostly done). +<item>Recognizer and handler for ed.c (mostly done). +<item>Recognizer and handler for ep.c (mostly done). +<item>User-mode recognizer and handler (partially done). </itemize> -<item>Advanced Power Management. Coordinator: &a.phk +<item>Advanced Power Management. Coordinators: &a.nate and &a.phk <itemize> -<item>APM sub-driver. -<item>IDE/ATA disk sub-driver. +<item>APM sub-driver (mostly done). +<item>IDE/ATA disk sub-driver (partially done). <item>syscons/pcvt sub-driver. +<item>Integration with the PCMCIA/PCCARD drivers (suspend/resume). </itemize> </enum> @@ -399,7 +401,7 @@ THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - $Id: submitters.sgml,v 1.2.4.3 1996-06-19 20:28:25 jkh Exp $ + $Id: submitters.sgml,v 1.2.4.4 1996-07-12 16:33:27 jkh Exp $ </verb></tscreen> For your convenience, a copy of this text can be found in <tt>/usr/share/examples/etc/bsd-style-copyright</tt>. |