Search Results for "python-i2c-tiny-usb"

The Hamlib project's purpose is to develop flexible and portable shared libraries that offer a standardized API to control any radio oriented equipment through a computer interface.

Linux Qt application for reading the Rui Deng TC66/TC66C USB Power Meter data and export it in CSV format. As manufacturer doesn't develop a Linux application for reading the device through USB, I've develop a simple one. It's based on the following projects: - https://github.com/Ralim/TC66C - https://github.com/kolinger/rd-usb This application has been made with QtCreator and depends on QtCharts library, so you must install it for compiling.

...It's an all-in-one solution to use the two instruments at the same time for Scientific, Research and Study purposes. Features avaible are the following: -Victor 86C USB HID connection protocol -86C data reading and logging -COM port selection -Continuous reading of Voltage and Current -Continuous logging of Voltage and Current in a Chart with the option to export data to csv file -Possibility to set logging rate from 50 ms -Turn ON and OFF instrument -Set Voltage and Current -Set a custom voltage loop to play and reiterate -Reiteration possible in three ways: for a fixed time, for a fixed number of cycles and until the STOP button is pressed

The ezLINX iCoupler Isolated Interface Development environment provides developers with a cost-effective, plug and play solution for evaluating eight physical Layer, digitally-isolated communication standards(USB, RS-422, RS-485, RS-232, CAN, SPI, I2C and LVDS). The Blackfin ADSP-BF548 processor is used to run the uCLinux operating system and allows for easy customization through the open source hardware and software platform. Development time is significantly reduced for embedded designers and system architects who are designing and evaluating isolated communication standards.The Interfaces on ezLINX use ADI's isolated transceivers with integrated iCoupler and isoPower® digital isolator technology.

This project is a simple USB-to-GBIB (IEEE488) interface from PC to GPIB-based devices.

Development of a USB interface library to different USB enabled development (hardware) platforms. Including, but not limited to, FPGA prototype boards.