Open Source Python Hardware Platforms for Linux - Page 5

WebODM is an open-source, user-friendly application for processing aerial imagery into mapping and 3D products. It can generate georeferenced maps, point clouds, elevation models, textured 3D models, and Gaussian splats. Its interface is designed to make photogrammetry workflows accessible without requiring direct command-line operation. Processing can be handled by several supported engines, including ODX, MicMac, and LGT. The current project has formally separated from OpenDroneMap and no longer serves as a front end for ODM. It is distributed under the AGPLv3 license and offers downloadable installers. WebODM targets professional mapping workflows while retaining self-hosting and open-source deployment options.

Cpuspeedy is simple and easy to use program which allows you to change the clock speed and voltage of the CPUs on the fly, using the Linux's CPUFreq driver. Use it and you should save battery consumption and reduce the temperature of your laptop.

Monitors CPU Temperature from command line in Fahrenheit and Celsius and gives results of highest and lowest temperatures, and average over period of time run, then logs the data. Requires ACPI.

LibGlade based, graphical calibrator for evtouch touchscreen drivers.

FreeNAS Temperature Report is a small server program that provides temperature readings for your FreeNAS unit. Install this program in a jail on your FreeNAS, then use your web browser and go to http://jail_ip to see your temperature readings. Installation instructions: http://sourceforge.net/p/freenas-tempreport/wiki/Install/

Gym-PyBullet-Drones is an open-source Gym-compatible environment for training and evaluating reinforcement learning agents on drone control and swarm robotics tasks. It leverages the PyBullet physics engine to simulate quadrotors and provides a platform for studying control, navigation, and coordination of single and multiple drones in 3D space.

Hardware Compatibility Test for the Librix Linux Distribution

iWattnick aims to be a top-class computer for e-bikes, e-scooters, e-motorcycles. It is equipped with a large B/W screen, two buttons, accelerometer, magnitometer, current and voltage sensors, light sensor, internal temperature sensor, battery-backed real-time clock, a buzzer and has connection ports for external speed sensor (motor Hall, phase or reed switch), a Bluetooth SPP dongle, up to three temperature sensors (TMP36, LM35, KTY83 etc), cadence sensor, throttle handle, output to controller throttle input. The project includes: The hardware (schematics & drawings) The firmware (microcontroller program) The software (for mobile phones and PC) Project developement is being tracked (in Russian) here: http://electrotransport.ru/ussr/index.php?topic=24226.0

kudev is a pyQt software which helps users create and manage easily their udev rules. Three main steps are done : detection, udev rule writting, fstab writting.

This library allows you to control a PMS (Particle Measuring Systems) Lasair II air particles counter. You can either use a COM component from several programming languages (Visual Basic, ...) or directly use its underlying Python class.

libdac2 is a userspace driver for dac-2 USB audio transport controllers which were manufactured by PCDJ.

Note: The project has moved to https://github.com/pyhys/minimalmodbus The files available here are very old, download from Github instead. MinimalModbus is an easy-to-use Python module for talking to instruments (slaves) from a computer (master) using the Modbus protocol, and is intended to be running on the master. Example code includes drivers for Eurotherm and Omega process controllers. The only dependence is the pySerial module (also pure Python). This software supports the ‘Modbus RTU’ and ‘Modbus ASCII’ serial communication versions of the protocol, and is intended for use on Linux, OS X and Windows platforms. It is open source, and has the Apache License, Version 2.0.

Please note that OWFS source code, and all Issue/Tickets/merge requests have now been moved to https://github.com/owfs/owfs/. Developer mailing lists will still be kept at Sourceforge. ---- OWFS -- 1-Wire file system. Use the Dallas 1-Wire and iButton chips with standard filesystem commands. Create temperature loggers. Monitor everything. OWHTTPD -- same system, only used as a light weight web server. OWFS is also ported to embedded routers, Mac OSX and Windows. Basically you can use these inexpensive little sensors and other chips with very simple wiring to sense and control the physical environment. The interface is very flexible -- everything from a web browser, to read and writing directly to the chip's "file" to integrating with your programs -- even over the internet. There is a growing number of 1-wire sensors: temperature, voltage, humidity, light, ultraviolet, pressure, thermisters, thermocouples, programmable microcontrollers, relays, lights, LCD panels, etc

A simple pic controller network with remote programming capability

Pure Python I2C protocol interface over pySerial, pyParallel, ...

The pycurry project is targeted for handling concurrency issues within the Python programming language. It also contains a (almost) fully functional 'Design by Contract' implementation.

A portable library for small monochrome graphics displays. We support most popular controllers for LCDs, VFDs, OLEDs, and ELs.

Python bindings and wrappers for accessing iButton devices on a 1-wire net.

pystim is an open source electrical stimulation device driver and development framework. It features a parallel/sequential block paradigm and supports event-base programming. It also provides a device simulator.

Python interface to A-Bit uGuru motherboards.

Python module for the i2c-tiny-usb project available here: http://www.harbaum.org/till/i2c_tiny_usb/index.shtml The module is an alternative for the linux kernel driver. With this module you can directly communicate with an I2C device. Discarded - Use Ti

The UniLog is a small onboard data logging device for rc models. It records stuff like current, voltage, rpm, height, airspeed... python-unilog is to retrieve the data and do what you want with it.

This daemon enable application to interact with Raspberry GPIO with DBUS standard API

This is a front end to the Sony Programmable I/O Control Device Driver. This spicctrl is used for configuring screen brightness, getting battery status, getting ac status, etc...